Description
Shielded Patch Panels are designed for connecting different SCS subsystems and network equipment to each other with patch cords. NIKOMAX NMC-RP24SA2-1U-MT (Cat. 6A), NMC-RP24SE2-1U-MT (Cat.6) and NMC-RP24SD2-1U-MT (CAT5) patch panels are made in stainless steel, fully shielded enclosures. They are designed for installation in 19 ‘‘ cabinets and racks. The panels have a standard height of 1U and can accommodate 24 port RJ45 / 8P8C. Universal IDC contacts for 110 / KRONE type knives are located on the rear side of panels . There are two wiring standards: T568 A and B. Shielded cable are grounded in pairs on the screw terminals. The cassette provided the 9th ground to IDC-contact - speci cally for the drain wire of the cable which both sides of the PCB have a common ground bus. For better shielding against electromagnetic interference and improve communication with unpainted rails cabinet, steel body panels are galvanized with nickel. A built-in organizer for secure fastening of cables.
|
Category |
6 |
|
Bandwidth, MHz |
250 |
|
Diameter of conductors, AWG |
~24-22 AWG (0.50-0.65 mm) |
|
Connection style |
Fully shielded |
|
Compliance |
Exceeds the requirements of the standards: ISO / IEC 11801, EN 50173 and ANSI / TIA -568-C.2 |
|
Supported applications |
10BASE-T, 100BASE-TX, 100BASE-T4, 1000BASE-T, 10G-BASE-T (For Cat. 6), ATM-25, ATM-51, ATM-155, 100VG-AnyLan, TR-4, TR-16 Active, TR-16 Passive |
|
Temperature ranges |
Storage -40 to +70 ° C. Installation 0 to +50 ° C. Operating -10 to +60 ° C |
|
Individual packing |
Cardboard box |
|
Warranty |
5 years - extended; 25 years - as part of the NIKOMAX SCS certified |
|
Number of ports |
24 |
|
Height, U |
1 |
|
Connector type |
RJ45/8P8C |
|
Connector material in connector |
Phosphor bronze |
|
Contact coating material |
Gold (50 micro-inches) over nickel (100 micro-inches) |
|
Number of cable connections |
Not less than 750 |
|
Type of IDC contacts (seal) |
110/KRONE |
|
Layout diagram |
T568A/B |
|
IDC Contact material |
Phosphor bronze |
|
IDC coating material |
Tin (100 micro-inches) |
|
Plastic material |
High-strength, non- flammable, meets UL94V-0 |
|
Marking |
All ports are numbered, there are additional labeling area |
|
Installation |
19" Cabinet or rack |
|
Depth in rack, mm |
100 |
|
Material of the supporting structure |
Galvanized steel: body - 1.5mm; cover - 1 mm. |
|
Protection level |
Metallic (Nickel) |
|
Insulation resistance |
Not less than 500 M ohms (at constant voltage of 100 V) |
|
Maximum load-bearing capacity |
Up to 1000 V, 60 Hz for 1 minute |
|
Contact resistance, μΩ |
Not more than 20 |
|
IDC Contact resistance, μΩ |
Not more than 2.5 |